packages: - !include common/wifi.yaml - !include common/canbus.yaml substitutions: name: sthome-ut9 friendly_name: "sthome-ut9" #ALLOWED_CHARACTERS_FULL: " !#%\"'()+,-./0123456789:;<>?@ABCDEFGHIJKLMNOPQRSTUVWYZ[]_abcdefghijklmnopqrstuvwxyz{|}°²³µ¿ÁÂÄÅÉÖÚßàáâãäåæçèéêëìíîðñòóôõöøùúûüýþāăąćčďĐđēėęěğĮįıļľŁłńňőřśšťũūůűųźŻżŽžơưșțΆΈΌΐΑΒΓΔΕΖΗΘΚΜΝΠΡΣΤΥΦάέήίαβγδεζηθικλμνξοπρςστυφχψωϊόύώАБВГДЕЖЗИКЛМНОПРСТУХЦЧШЪЭЮЯабвгдежзийклмнопрстуфхцчшщъыьэюяёђєіїјљњћ" ALLOWED_CHARACTERS: " !#%\"'()+,-./0123456789:;<>?@ABCDEFGHIJKLMNOPQRSTUVWYZ[]_abcdefghijklmnopqrstuvwxyz{|}°²³µ•" DD_MAX_YEARS: "5" globals: - id: g_month_idx type: int restore_value: yes initial_value: '0' - id: g_year_idx type: int restore_value: yes initial_value: '0' - id: g_options_year type: char[1 + ${DD_MAX_YEARS} * 5] restore_value: yes # initial_value: "{2022\n2023\n2024\n2025\n2026}" - id: g_geyser_heating_on type: bool restore_value: no initial_value: '0' - id: g_utility_on type: bool restore_value: no initial_value: '0' - id: g_geyser_top_temperature type: double restore_value: yes initial_value: '0' - id: g_geyser_bottom_temperature type: double restore_value: yes initial_value: '0' - id: can_lastid type: uint32_t restore_value: no - id: can_lastframe type: std::vector restore_value: no esphome: name: "${name}" friendly_name: "${friendly_name}" esp32: # board: nodemcu-32s board: esp32dev framework: type: arduino #type: esp-idf #debug: # update_interval: 5s # Enable logging logger: level: DEBUG logs: canbus: INFO # Enable Home Assistant API api: encryption: key: "LI7j37zs9HsWNsUZ5c83leThmhHsgIVReAPoc9U6pVU=" ota: - platform: esphome password: "8ebd5bcefbdc833a5f6ddc4e8ba56e39" wifi: power_save_mode: none # stops display flickering manual_ip: static_ip: 10.0.2.9 # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "${name} Fallback Hotspot" password: "iZxjpw7ucRs4" captive_portal: time: - platform: homeassistant id: time_source update_interval: 360min # Change sync interval from default 5min to 6 hours on_time_sync: then: # - if: # Publish the time the device was last restarted, but only once. # condition: # lambda: 'return id(device_last_restart).state == "";' # then: # - text_sensor.template.publish: # id: device_last_restart # state: !lambda 'return id(time_source).now().strftime("%a %d %b %Y - %I:%M:%S %p");' # - script.execute: ind_heating_update # - script.execute: time_update # - script.execute: init_calendar on_time: - minutes: '*' seconds: '*' then: # - script.execute: ind_heating_update # - script.execute: time_update # - lambda: |- # id(get_calendar_days_state).execute("T"); #- script.execute: get_calendar_days_state # # - hours: 1,2,3,4 # minutes: 5 # seconds: 0 # then: # - switch.turn_on: switch_antiburn # - hours: 1,2,3,4 # minutes: 35 # seconds: 0 # then: # - switch.turn_off: switch_antiburn font: - file: "gfonts://Roboto" id: roboto_200 size: 200 bpp: 4 glyphs: [ 0123456789,.,°,a,n, "\u0020", # space "\u003A", # colon ] - file: "gfonts://Roboto" id: roboto_192 size: 192 bpp: 4 glyphs: [ 0123456789,.,°,a,n, "\u0020", # space "\u003A", # colon ] - file: "gfonts://Roboto" id: geyser_temperature_font2 size: 60 bpp: 4 glyphs: [ °,C, ] - file: "gfonts://Roboto" id: geyser_temperature_font3 size: 30 bpp: 4 glyphs: [ b,o,m,p,t, ] - file: "fonts/misc/materialdesignicons-webfont.ttf" id: font_icon_small size: 24 #45 glyphs: [ "\U0000F5A9", ] color: - id: grey_light hex: 'e0e0e0' #image: ## - file: https://esphome.io/_static/favicon-512x512.png ## id: boot_logo ## resize: 200x200 ## type: RGB565 ## transparency: alpha_channel # - file: mdi:fire # id: icon_fire # resize: 100x100 # type: BINARY # - file: mdi:transmission-tower # id: icon_utility # resize: 80x80 # type: BINARY # #psram: sun: id: sun_sensor latitude: !secret latitude longitude: !secret longitude #interval: # - interval: 10s # then: # - canbus.send: # canbus_id: canbus_sthome # data: [0x48, 0x45, 0x4C, 0x4C, 0x4F] # - lambda: |- # ESP_LOGI("SND:${CB_CANBUS_ID9}", "HELLO"); spi: - id: spi_bus0 clk_pin: GPIO18 mosi_pin: GPIO23 miso_pin: GPIO19 interface: any - id: spi_bus1 clk_pin: GPIO17 mosi_pin: GPIO16 miso_pin: GPIO25 interface: any #one_wire: # - platform: gpio # pin: GPIO4 # id: temperature_sensors # CAN BUS canbus: - platform: mcp2515 cs_pin: GPIO05 spi_id: spi_bus1 id: canbus_sthome mode: LISTENONLY can_id: ${CB_CANBUS_ID9} #mode: NORMAL #LISTENONLY bit_rate: 500KBPS on_frame: - can_id: 0 can_id_mask: 0 then: - lambda: |- id(dump_can_message).execute(x, can_id, remote_transmission_request); - can_id: ${CB_BATTERY_STATE} then: - lambda: |- auto value = static_cast((x[1] << 8) + x[0]); id(battery_soc).publish_state(value); value = static_cast((x[3] << 8) + x[2]); id(battery_soh).publish_state(value); - can_id: ${CB_BATTERY_STATUS} then: - lambda: |- float value = 0.01 * static_cast((x[1] << 8) + x[0]); // unit = 0.01V Voltage of single module or average module voltage of system // ESP_LOGW("REC: ${CB_BATTERY_STATUS}", "Voltage: %f", value); id(battery_system_voltage).publish_state(value); value = 0.1 * static_cast((x[3] << 8) + x[2]); // unit = 0.1A Module or system total current // ESP_LOGW("REC: ${CB_BATTERY_STATUS}", "Current: %f", value); id(battery_system_current).publish_state(value); value = 0.1 * static_cast((x[5] << 8) + x[4]); // unit = 0.1°C id(battery_average_cell_temperature).publish_state(value); - can_id: ${CB_BATTERY_SETTING} then: - lambda: |- float value = 0.1 * ((x[1] << 8) + x[0]); // unit = 0.1V id(battery_charge_voltage_limit).publish_state(value); value = 0.1 * static_cast((x[3] << 8) + x[2]); // unit = 0.1A id(battery_charge_current_limit).publish_state(value); value = 0.1 * static_cast((x[5] << 8) + x[4]); // unit = 0.1A id(battery_discharge_current_limit).publish_state(value); - can_id: ${CB_BATTERY_INFO} then: - lambda: |- char buffer[16]; uint8_t protection1 = x[0]; uint8_t protection2 = x[1]; uint8_t alarm1 = x[2]; uint8_t alarm2 = x[3]; uint8_t module_numbers = x[4]; char ch5 = x[5]; char ch6 = x[6]; id(battery_discharge_over_current).publish_state(protection1 & 0x80); id(battery_cell_under_temperature).publish_state(protection1 & 0x10); id(battery_cell_over_temperature).publish_state(protection1 & 0x08); id(battery_cell_or_module_under_voltage).publish_state(protection1 & 0x04); id(battery_cell_or_module_over_voltage).publish_state(protection1 & 0x02); id(battery_system_error).publish_state(protection2 & 0x8); id(battery_charge_over_current).publish_state(protection2 & 0x01); id(battery_discharge_high_current).publish_state(alarm1 & 0x80); id(battery_cell_low_temperature).publish_state(alarm1 & 0x10); id(battery_cell_high_temperature).publish_state(alarm1 & 0x08); id(battery_cell_or_module_low_voltage).publish_state(alarm1 & 0x04); id(battery_cell_or_module_high_voltage).publish_state(alarm1 & 0x02); id(battery_internal_communication_fail).publish_state(alarm2 & 0x8); id(battery_charge_high_current).publish_state(alarm2 & 0x01); snprintf(buffer, sizeof(buffer), "%d %c%c", module_numbers, ch5, ch6); id(battery_module_numbers).publish_state(buffer); - can_id: ${CB_BATTERY_REQUEST_FLAG} then: - lambda: |- uint8_t request_flag = x[0]; id(battery_charge_enable).publish_state(request_flag & 0x80); id(battery_discharge_enable).publish_state(request_flag & 0x40); id(battery_request_force_charge1).publish_state(request_flag & 0x20); id(battery_request_force_charge2).publish_state(request_flag & 0x10); id(battery_request_full_charge).publish_state( request_flag & 0x08); - can_id: ${CB_BATTERY_MANUFACTURER} then: - lambda: |- std::string str(x.begin(), x.end()); id(battery_manufacturer).publish_state(str); # - can_id: ${CB_GEYSER_ENERGISED} # then: # - lvgl.widget.update: # id: ind_geyser_on # hidden: !lambda |- # std::string on_state(x.begin(), x.end()); # //ESP_LOGI("REC:${CB_GEYSER_ENERGISED}", "GEYSER IS: %s", on_state.c_str()); # if(on_state == "ON") { # id(g_geyser_heating_on) = true; # return false; // not hidden # } # else if(on_state == "OFF") { # id(g_geyser_heating_on) = false; # return true; // hidden # } # //ESP_LOGW("REC:${CB_GEYSER_ENERGISED}", "Invalid ON/OFF value: %s", on_state.c_str()); # return true; // default # - can_id: ${CB_UTILITY_POWER_ON} # then: # - lvgl.widget.update: # id: ind_utility_on # hidden: !lambda |- # std::string on_state(x.begin(), x.end()); # ESP_LOGI("REC:${CB_UTILITY_POWER_ON}", "UTILITY IS: %s", on_state.c_str()); # if(on_state == "ON") { # id(g_utility_on) = true; # return false; // not hidden # } # else if(on_state == "OFF") { # id(g_utility_on) = false; # return true; // hidden # } # ESP_LOGW("REC:${CB_UTILITY_POWER_ON}", "Invalid ON/OFF value: %s", on_state.c_str()); # return true; // default # - can_id: ${CB_GEYSER_TOP_TEMPERATURE} # then: # - lambda: |- # id(update_temperature_display).execute(x, id(g_geyser_top_temperature), rect_gtoptemp, ind_utility_on, lbl_gtoptemp); # # - can_id: ${CB_GEYSER_BOTTOM_TEMPERATURE} # then: # - lambda: |- # id(update_temperature_display).execute(x, id(g_geyser_bottom_temperature) , rect_gbottemp, ind_geyser_on, lbl_gbottemp); # # - can_id: ${CB_CANBUS_ID1} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID1}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID2} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID2}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID3} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID3}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID4} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID4}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID5} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID5}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID6} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID6}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID7} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID7}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID8} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID8}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID9} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID9}", "%s", &b[0] ); # - can_id: ${CB_CANBUS_ID10} # then: # - lambda: |- # std::string b(x.begin(), x.end()); # ESP_LOGI("REC:${CB_CANBUS_ID10}", "%s", &b[0] ); # - can_id: 0x402 # then: # - lambda: |- # std::string b(x.begin(), x.end()); # //ESP_LOGI("canid 0x402", "%s", &b[0] ); # ESP_LOGI("RECEIVED: canid 0x402", "%s", b.c_str()); # - can_id: 0x400 # then: # - lambda: |- # std::string b(x.begin(), x.end()); # //ESP_LOGI("canid 0x400", "%s", &b[0] ); # ESP_LOGI("RECEIVED: canid 0x400", "%s", b.c_str()); # - can_id: 0x401 # then: # - lambda: |- # std::string b(x.begin(), x.end()); # //ESP_LOGI("canid 0x401", "%s", &b[0] ); # ESP_LOGI("RECEIVED: canid 0x401", "%s", b.c_str()); #display: # - platform: ili9xxx # model: ili9488 # id: tft_display # color_palette: 8BIT # data_rate: 40MHz # spi_id: spi_bus0 # cs_pin: GPIO15 # dc_pin: GPIO2 # reset_pin: GPIO27 # auto_clear_enabled: false # update_interval: never # invert_colors: false # show_test_card: true # transform: # swap_xy: true # landscape ## mirror_x: true # landscape # dimensions: # height: 480 # width: 320 # Define a PWM output on the ESP32 output: - platform: ledc pin: GPIO26 id: backlight_pwm # Define a monochromatic, dimmable light for the backlight light: - platform: monochromatic output: backlight_pwm name: "Display Backlight" id: back_light restore_mode: ALWAYS_ON #touchscreen: # platform: xpt2046 # id: touch_screen # spi_id: spi_bus0 # cs_pin: GPIO33 # transform: # swap_xy: true # landscape # # mirror_y: true # portrait # calibration: # x_min: 231 #201 #281 # x_max: 3878 #3793 #3848 # y_min: 221 #228 #347 # y_max: 3861 #3914 #3878 # #lvgl: ## color_depth: 16 ## bg_color: 0x0F0F0F # default_font: unscii_8 ## align: center # theme: # button: # bg_color: grey_light #0x2F8CD8 ## bg_grad_color: 0x005782 ## bg_grad_dir: VER # bg_opa: COVER # border_color: 0x0077b3 # border_width: 1 # text_color: 0xFFFFFF # pressed: # set some button colors to be different in pressed state # bg_color: 0x006699 # bg_grad_color: 0x00334d # checked: # set some button colors to be different in checked state # bg_color: 0x1d5f96 # bg_grad_color: 0x03324A # text_color: 0xfff300 ## switch: ## bg_color: 0xC0C0C0 ## bg_grad_color: 0xb0b0b0 ## bg_grad_dir: VER ## bg_opa: COVER ## checked: ## bg_color: 0x1d5f96 ## bg_grad_color: 0x03324A ## bg_grad_dir: VER ## bg_opa: COVER ## knob: ## bg_color: 0xFFFFFF ## bg_grad_color: 0xC0C0C0 ## bg_grad_dir: VER ## bg_opa: COVER ## slider: ## border_width: 1 ## border_opa: 15% ## bg_color: 0xcccaca ## bg_opa: 15% ## indicator: ## bg_color: 0x1d5f96 ## bg_grad_color: 0x03324A ## bg_grad_dir: VER ## bg_opa: COVER ## knob: ## bg_color: 0x2F8CD8 ## bg_grad_color: 0x005782 ## bg_grad_dir: VER ## bg_opa: COVER ## border_color: 0x0077b3 ## border_width: 1 ## text_color: 0xFFFFFF # style_definitions: # - id: header_footer # bg_color: darkgrey #0x2F8CD8 # bg_opa: COVER # border_opa: TRANSP # radius: 0 # pad_all: 0 # pad_row: 0 # pad_column: 0 # border_color: 0x0077b3 # text_color: 0xFFFFFF # width: 100% # height: 30 ## - id: clockdate_style ## text_font: montserrat_20 #roboto_20 #unscii_8 ## text_align: center ## text_color: 0x000000 ## radius: 4 ## pad_all: 2 ## - id: sty_calendar_small ## radius: 0 ## pad_all: 0 ## pad_row: 0 ## pad_column: 0 ## text_font: unscii_8 ## shadow_opa: TRANSP ## text_color: black ## bg_color: white ## bg_opa: COVER ## border_color: grey_light ## border_width: 1 ## border_opa: cover #TRANSP ## - id: sty_calendar_small_noborders ## radius: 0 ## pad_all: 0 ## pad_row: 0 ## pad_column: 0 ## text_font: unscii_8 ## shadow_opa: TRANSP ## text_color: black ## bg_color: white ## bg_opa: COVER ## border_color: grey_light ## border_width: 0 ## border_opa: cover #TRANSP # displays: # - tft_display # buffer_size: 12% # top_layer: # widgets: # - label: # text: "\U0000F5A9" # "\uF1EB" # id: lbl_hastatus # hidden: true # align: top_right # x: -2 # y: 1 # text_font: font_icon_small #montserrat_16 # text_align: right # text_color: 0x202020 # 0xFFFFFF # - obj: # clipping rectangle # x: 0 #15 # y: -24 #7 # pad_all: 0 # height: 90 # width: 65 # align: BOTTOM_RIGHT # bg_color: 0x000000 # border_color: 0xFFFFFF # border_width: 0 # radius: 0 # bg_opa: LV_OPA_TRANSP # scrollbar_mode: "OFF" # widgets: # - image: # id: ind_geyser_on # align: CENTER #BOTTOM_RIGHT #TOP_RIGHT # src: icon_fire # image_recolor: RED # image_recolor_opa: 100% # x: 0 #15 #15 # y: 0 #-22 #7 # height: 100 #25 # width: 100 #25 # - obj: # clipping rectangle # x: 0 #15 # y: 2 #-24 #7 # pad_all: 0 # height: 80 # width: 65 # align: TOP_LEFT # bg_color: 0x000000 # border_color: 0xFFFFFF # border_width: 0 # radius: 0 # bg_opa: LV_OPA_TRANSP # scrollbar_mode: "OFF" # widgets: # - image: # id: ind_utility_on # align: CENTER #BOTTOM_RIGHT #TOP_RIGHT # src: icon_utility # image_recolor: grey #!lambda 'return lv_color_hex(0x000000);' # image_recolor_opa: 100% # x: 0 #15 #15 # y: 0 #-22 #7 # height: 80 #25 # width: 80 #25 ## - obj: ## id: boot_screen ## x: 0 ## y: 0 ## width: 100% ## height: 100% ## bg_color: 0xffffff ## bg_opa: COVER ## radius: 0 ## pad_all: 0 ## border_width: 0 ## widgets: ## - image: ## align: CENTER ## src: boot_logo ## y: -40 ## - spinner: ## align: CENTER ## y: 95 ## height: 50 ## width: 50 ## spin_time: 1s ## arc_length: 60deg ## arc_width: 8 ## indicator: ## arc_color: 0x18bcf2 ## arc_width: 8 ## on_press: ## - lvgl.widget.hide: boot_screen # - buttonmatrix: # text_font: montserrat_16 # align: bottom_mid # styles: header_footer # pad_all: 0 # outline_width: 0 # id: footer # width: 480 # items: # styles: header_footer # rows: # - buttons: # - id: page_prev # text: "\uF053" # on_press: # then: # lvgl.page.previous: # - id: page_home # text: "\uF015" # on_press: # then: # lvgl.page.show: main_page # - id: page_next # text: "\uF054" # on_press: # then: # lvgl.page.next: # pages: # # - id: pg_calendar # # widgets: # # - button: # # id: cal_btn_prev_month # # styles: sty_calendar_small # # align: TOP_MID # # pad_all: 0 # # outline_width: 0 # # border_color: black # # border_width: 0 #1 # # border_opa: TRANSP # # x: -75 # # y: 30 # # width: 20 # # height: 20 # # bg_color: grey_light # # text_color: 0xD3D3D3 # # text_font: montserrat_14 # # widgets: # # - label: # # align: center # # text_font: montserrat_14 # # text: "<" # # on_press: # # then: # # lambda: |- # # id(update_calendar_month).execute(-1); # # - dropdown: # # id: cal_dd_year # # styles: sty_calendar_small # # text_font: montserrat_12 # # height: 20 # # width: 55 # # radius: 0 # # align_to: # # id: cal_btn_prev_month # # align: out_right_top # # x: 80 # # y: 0 #12.5% # # options: # # - 2024 # # - 2025 # # selected_index: 0 # # dropdown_list: # # text_line_space: 3 # # pad_all: 1 # # text_font: unscii_8 # # max_height: 260 # # radius: 0 # # selected: # # checked: # # text_color: 0xFF0000 # # on_value: # # then: # # - lambda: |- # # id(update_calendar).execute(); # # - dropdown: # # id: cal_dd_month # # styles: sty_calendar_small # # text_font: montserrat_12 # # height: 20 # # width: 55 # # radius: 0 # # align_to: # # id: cal_dd_year # # align: out_right_top # # x: 0 # # y: 0 #12.5% # # options: # # - Jan # # - Feb # # - Mar # # - Apr # # - May # # - Jun # # - Jul # # - Aug # # - Sep # # - Oct # # - Nov # # - Dec # # selected_index: 0 # # dropdown_list: # # text_line_space: 3 # # pad_all: 1 # # text_font: unscii_8 # # max_height: 260 # # radius: 0 # # selected: # # checked: # # text_color: 0xFF0000 # # on_value: # # then: # # - lambda: |- # # id(update_calendar).execute(); # # - button: # # id: cal_btn_next_month # # styles: sty_calendar_small # # align_to: # # id: cal_dd_month # # align: out_right_top # # x: 0 # # y: 0 # # pad_all: 0 # # outline_width: 0 # # border_color: black # # border_width: 0 #1 # # border_opa: TRANSP # # x: -75 # # y: 30 # # width: 20 # # height: 20 # # bg_color: grey_light # # text_color: 0xD3D3D3 # # text_font: montserrat_14 # # widgets: # # - label: # # align: center # # text_font: montserrat_14 # # text: ">" # # on_press: # # then: # # lambda: |- # # id(update_calendar_month).execute(1); # # - buttonmatrix: # # id: bmx_cal_header_dow # # styles: sty_calendar_small_noborders # # align_to: # # id: cal_btn_prev_month # # align: out_bottom_left # # x: 80 # # y: 0 #12.5% # # pad_all: 0 # # outline_width: 0 # # border_color: black # # border_width: 0 #1 # # border_opa: TRANSP # # x: 0 # # y: 0 # # width: 150 # # height: 20 # # bg_color: black # # text_color: 0xD3D3D3 # # items: # # styles: sty_calendar_small_noborders # # pressed: # # bg_color: 0x006699 # # bg_grad_color: 0x00334d # # checked: # # bg_color: 0x1d5f96 # # bg_grad_color: 0x03324A # # rows: # # - buttons: # # - id: r0c1 # # text: "Su" # # width: 1 # # - id: r0c2 # # text: "Mo" # # width: 1 # # - id: r0c3 # # text: "Tu" # # width: 1 # # - id: r0c4 # # text: "We" # # width: 1 # # - id: r0c5 # # text: "Th" # # width: 1 # # - id: r0c6 # # text: "Fr" # # width: 1 # # - id: r0c7 # # text: "Sa" # # width: 1 # # on_press: # # then: # # - lambda: |- # # ESP_LOGI("day of week", "%d", x); # # - buttonmatrix: # # id: bmx_calendar # # styles: sty_calendar_small # # align_to: # # id: bmx_cal_header_dow # # align: out_bottom_left # # x: 0 # # y: 0 #12.5% # # pad_all: 0 # # outline_width: 0 # # border_color: black # # border_width: 0 #1 # # border_opa: TRANSP # # x: 0 # # y: 0 # # width: 150 # # height: 100 # # bg_color: black # # text_color: 0xD3D3D3 # # items: # # styles: sty_calendar_small # # pressed: # # bg_color: 0x006699 # # bg_grad_color: 0x00334d # # checked: # # bg_color: 0x1d5f96 # # bg_grad_color: 0x03324A # # rows: # # - buttons: # # - id: r1c1 # # text: " " # # width: 1 # # control: # # recolor: true # # - id: r1c2 # # text: " " # # width: 1 # # - id: r1c3 # # text: "1" # # width: 1 # # - id: r1c4 # # text: "2" # # width: 1 # # - id: r1c5 # # text: "3" # # width: 1 # # - id: r1c6 # # text: "4" # # width: 1 # # - id: r1c7 # # text: "5" # # width: 1 # # # # Define actions on button press # # on_press: # # then: # # lambda: |- # # //lv_btnmatrix_set_btn_ctrl_all(bmx_calendar->obj, LV_BTNMATRIX_CTRL_CHECKABLE | LV_BTNMATRIX_CTRL_RECOLOR); # # //lv_btnmatrix_set_one_checked(bmx_calendar->obj, false); # # //id(get_calendar_days_state).execute("P1"); # # //auto stat = lv_btnmatrix_has_btn_ctrl(bmx_calendar->obj, x, LV_BTNMATRIX_CTRL_CHECKED); # # //ESP_LOGI("on press", "day: %s, stat: %d", lv_btnmatrix_get_btn_text(bmx_calendar->obj, x), stat); # # //id(get_calendar_days_state).execute("P2"); # # on_release: # # then: # # lambda: |- # # id(get_calendar_days_state).execute("R1"); # # //auto stat = lv_btnmatrix_has_btn_ctrl(bmx_calendar->obj, x, LV_BTNMATRIX_CTRL_CHECKED); # # //auto* day = lv_btnmatrix_get_btn_text(bmx_calendar->obj, x); # # // if(stat) { # # // lv_btnmatrix_clear_btn_ctrl(bmx_calendar->obj, x, LV_BTNMATRIX_CTRL_CHECKED); # # // } # # // else { # # // lv_btnmatrix_set_btn_ctrl(bmx_calendar->obj, x, LV_BTNMATRIX_CTRL_CHECKED); # # // } # # //auto stat = lv_btnmatrix_has_btn_ctrl(bmx_calendar->obj, x, LV_BTNMATRIX_CTRL_CHECKED); # # //ESP_LOGI("on relse", "day: %s, stat: %d", lv_btnmatrix_get_btn_text(bmx_calendar->obj, x), stat); # # //id(get_calendar_days_state).execute("R2"); # # - id: main_page #pg_geyser_temp # widgets: # - obj: # id: rect_gtoptemp # x: 0 # y: 0 #30 # pad_all: 0 # height: 290 # width: 240 # align: TOP_LEFT # bg_color: 0x000000 # border_color: 0xFFFFFF # border_width: 0 # radius: 0 # bg_opa: COVER # - obj: # id: rect_gbottemp # y: 0 # pad_all: 0 # height: 290 # width: 240 # align_to: # id: rect_gtoptemp # align: out_right_top # x: 0 # y: 0 #12.5% # bg_color: 0x000000 #0xFF4500 # border_color: 0xFFFFFF # border_width: 0 # radius: 0 # bg_opa: COVER # - label: # text: " " # id: lbl_gtoptemp # hidden: false # align: LEFT_MID # x: 0 # y: -10 # text_font: roboto_200 # text_align: center # text_color: 0x0 # bg_opa: LV_OPA_TRANSP # bg_color: 0xffffff # - label: # text: " " # id: lbl_gbottemp # hidden: false # align: RIGHT_MID # x: 0 # y: -10 # text_font: roboto_200 # text_align: center # text_color: 0x0 # bg_opa: LV_OPA_TRANSP # bg_color: 0xffffff ## - label: ## text: "°C" ## id: lbl_degree ## hidden: false ## align: BOTTOM_MID ## x: 0 ## y: -30 ## text_font: geyser_temperature_font2 ## text_align: center ## text_color: 0x0 ## bg_opa: LV_OPA_TRANSP ## bg_color: 0xffffff # - label: # text: "top" # id: lbl_top # hidden: false # align: TOP_MID # x: -120 # y: 20 # text_font: geyser_temperature_font3 # text_align: center # text_color: 0x0 # bg_opa: LV_OPA_TRANSP # bg_color: 0xffffff # - label: # text: "bottom" # id: lbl_bottom # hidden: false # align: TOP_MID # x: 120 # y: 20 # text_font: geyser_temperature_font3 # text_align: center # text_color: 0x0 # bg_opa: LV_OPA_TRANSP # bg_color: 0xffffff # ## - id: pg_settings ## widgets: ## - textarea: ## id: geyser_schedule ## one_line: true ## placeholder_text: "Enter text here" ## - keyboard: ## id: keyboard_id ## textarea: geyser_schedule ## mode: TEXT_UPPER ## text_font: montserrat_20 ## on_focus: ## then: ## - lvgl.keyboard.update: ## id: keyboard_id ## mode: number ## textarea: geyser_schedule ## on_ready: ## then: ## - logger.log: Keyboard is ready ## on_cancel: ## then: ## - logger.log: Keyboard cancelled# # ## - id: pg_clock ## widgets: ## - obj: # clock container ## height: 300 #SIZE_CONTENT ## width: 300 # 100% ## align: TOP_MID ## pad_all: 0 ## border_width: 0 ## bg_color: 0xFFFFFF ## widgets: ## - meter: # clock face ## height: 300 ## width: 300 ## align: TOP_MID ## bg_opa: TRANSP ## border_width: 0 ## text_color: 0x000000 ## scales: ## - range_from: 0 # minutes scale ## range_to: 720 ## angle_range: 360 ## rotation: 270 ## ticks: ## width: 1 ## count: 61 ## length: 10 ## color: 0x000000 ## indicators: ## - line: ## id: minute_hand ## width: 3 ## color: 0xa6a6a6 ## r_mod: -4 ## value: 0 ## - range_from: 1 # hours scale for labels ## range_to: 12 ## angle_range: 330 ## rotation: 300 ## ticks: ## width: 1 ## count: 12 ## length: 1 ## major: ## stride: 1 ## width: 4 ## length: 10 ## color: 0xC0C0C0 ## label_gap: 12 ## - range_from: 0 # hi-res hours scale for hand ## range_to: 720 ## angle_range: 360 ## rotation: 270 ## ticks: ## count: 0 ## indicators: ## - line: ## id: hour_hand ## width: 5 ## color: 0xa6a6a6 ## r_mod: -30 ## value: 0 ## # Second hand ## - angle_range: 360 ## rotation: 270 ## range_from: 0 ## range_to: 60 ## indicators: ## - line: ## id: second_hand ## width: 2 ## color: Red ## r_mod: -10 ## - label: ## align: CENTER ## styles: clockdate_style ## id: day_label ## y: -50 ## - label: ## align: CENTER ## id: date_label ## styles: clockdate_style ## y: 50 # ## - id: pg_digital_clock ## widgets: ## - obj: ## id: rect_gtoptemp1 ## x: 0 ## y: 0 #30 ## pad_all: 0 ## height: 290 ## width: 240 ## align: TOP_LEFT ## bg_color: 0x000000 ## border_color: 0xFFFFFF ## border_width: 0 ## radius: 0 ## bg_opa: COVER ## - obj: ## id: rect_gbottemp1 ## y: 0 ## pad_all: 0 ## height: 290 ## width: 240 ## align_to: ## id: rect_gtoptemp ## align: out_right_top ## x: 0 ## y: 0 #12.5% ## bg_color: 0x000000 #0xFF4500 ## border_color: 0xFFFFFF ## border_width: 0 ## radius: 0 ## bg_opa: COVER ## - label: ## text: " " ## id: lbl_digitalclock ## hidden: false ## align: TOP_MID ## x: 0 ## y: 20 ## text_font: roboto_192 ## text_align: center ## text_color: RED ## bg_opa: LV_OPA_TRANSP ## bg_color: 0xffffff # #switch: # - platform: restart # name: "${name} Restart" # id: "restart_switch" ## - platform: template ## name: Antiburn ## id: switch_antiburn ## icon: mdi:television-shimmer ## optimistic: true ## entity_category: "config" ## turn_on_action: ## - logger.log: "Starting Antiburn" ## - if: ## condition: lvgl.is_paused ## then: ## - lvgl.resume: ## - lvgl.widget.redraw: ## - lvgl.pause: ## show_snow: true ## turn_off_action: ## - logger.log: "Stopping Antiburn" ## - if: ## condition: lvgl.is_paused ## then: ## - lvgl.resume: ## - lvgl.widget.redraw: binary_sensor: - platform: template id: battery_discharge_over_current name: "Battery Discharge Over Current" device_class: problem - platform: template id: battery_cell_under_temperature name: "Battery Cell Under Temperature" device_class: problem - platform: template id: battery_cell_over_temperature name: "Battery Cell Over Temperature" device_class: problem - platform: template id: battery_cell_or_module_under_voltage name: "Battery Under Voltage" device_class: problem - platform: template id: battery_cell_or_module_over_voltage name: "Battery Over Voltage" device_class: problem - platform: template id: battery_system_error name: "Battery System Error" device_class: problem - platform: template id: battery_charge_over_current name: "Battery Charge Over Current" device_class: problem - platform: template id: battery_discharge_high_current name: "Battery Discharge High Current" device_class: problem - platform: template id: battery_cell_low_temperature name: "Battery Low Temperature" device_class: problem - platform: template id: battery_cell_high_temperature name: "Battery High Temperature" device_class: problem - platform: template id: battery_cell_or_module_low_voltage name: "Battery Low Voltage" device_class: problem - platform: template id: battery_cell_or_module_high_voltage name: "Battery High Voltage" device_class: problem - platform: template id: battery_internal_communication_fail name: "Battery Communication Fail" device_class: problem - platform: template id: battery_charge_high_current name: "Battery Charge High Current" device_class: problem - platform: template id: battery_charge_enable name: "Battery Charge Enable" #device_class: battery_charging - platform: template id: battery_discharge_enable name: "Battery Discharge Enable" #device_class: battery_charging - platform: template id: battery_request_force_charge1 name: "Battery Request Force Charge 1" # device_class: battery_charging - platform: template id: battery_request_force_charge2 name: "Battery Request Force Charge 2" # device_class: battery_charging - platform: template id: battery_request_full_charge name: "Battery Request Full Charge " # device_class: battery_charging - platform: template id: battery_charging name: "Battery Charging" device_class: battery_charging lambda: "return id(battery_system_current).state > 0;" sensor: - platform: template id: battery_soc name: "Battery SOC" accuracy_decimals: 0 unit_of_measurement: "%" state_class: measurement device_class: battery - platform: template id: battery_soh name: "Battery SOH" accuracy_decimals: 0 unit_of_measurement: "%" state_class: measurement device_class: battery - platform: template id: battery_system_voltage name: "Battery Voltage" accuracy_decimals: 2 unit_of_measurement: "V" state_class: measurement device_class: voltage - platform: template id: battery_system_current name: "Battery Current" accuracy_decimals: 1 unit_of_measurement: "A" state_class: measurement device_class: current - platform: template id: battery_average_cell_temperature name: "Battery Cell Temperature" accuracy_decimals: 1 unit_of_measurement: "°C" device_class: temperature state_class: measurement - platform: template id: battery_charge_voltage_limit name: "Battery Charge Voltage Limit" accuracy_decimals: 1 unit_of_measurement: "V" state_class: measurement device_class: voltage - platform: template id: battery_charge_current_limit name: "Battery Charge Current Limit" accuracy_decimals: 1 unit_of_measurement: "A" state_class: measurement device_class: current - platform: template id: battery_discharge_current_limit name: "Battery Discharge Current Limit" accuracy_decimals: 1 unit_of_measurement: "A" state_class: measurement device_class: current # - platform: dallas_temp # address: 0xfe00000037b3d528 # name: "Study Temperature" # id: study_temperature # update_interval: "60s" # resolution: 12 # one_wire_id: temperature_sensors # unit_of_measurement: "°C" # #icon: "mdi:water-thermometer" # device_class: "temperature" # state_class: "measurement" # accuracy_decimals: 1 # filters: # - filter_out: nan # # - sliding_window_moving_average: # # window_size: 120 # averages over 120 update intervals # # send_every: 60 # reports every 60 update intervals # Report wifi signal strength every 5 min if changed - platform: wifi_signal name: WiFi Signal id: wifi_sig update_interval: 300s filters: - delta: 10% # human readable uptime sensor output to the text sensor above # - platform: uptime # name: Uptime in Days # id: uptime_sensor_days # update_interval: 10s # on_raw_value: # then: # - text_sensor.template.publish: # id: uptime_human # state: !lambda |- # int seconds = round(id(uptime_sensor_days).raw_state); # int days = seconds / (24 * 3600); # seconds = seconds % (24 * 3600); # int hours = seconds / 3600; # seconds = seconds % 3600; # int minutes = seconds / 60; # seconds = seconds % 60; # auto days_str = std::to_string(days); # auto hours_str = std::to_string(hours); # auto minutes_str = std::to_string(minutes); # auto seconds_str = std::to_string(seconds); # return ( # (days ? days_str + "d " : "") + # (hours ? hours_str + "h " : "") + # (minutes ? minutes_str + "m " : "") + # (seconds_str + "s") # ).c_str(); # ## number of seconds since midnight # - platform: template # id: time_of_day # name: "Time of day" # accuracy_decimals: 0 # unit_of_measurement: "s" # lambda: |- # auto currenttime = id(time_source).now(); # ESPTime time_obj = currenttime; # time_obj.second = 0; # time_obj.minute = 0; # time_obj.hour = 0; # time_obj.recalc_timestamp_local(); # return currenttime.timestamp - time_obj.timestamp; # update_interval: 60s text_sensor: ## - platform: template ## id: module_time ## name: "Module time" ## icon: mdi:clock ## lambda: |- ## auto time_obj = id(time_source).now(); ## return time_obj.strftime("%Y-%m-%d %H:%M:%S"); ## update_interval: 60s # # # Expose WiFi information as sensors # - platform: wifi_info # ip_address: # name: IP # mac_address: # name: Mac Address # entity_category: diagnostic # ssid: # name: "Connected SSID" # id: ssid # entity_category: diagnostic # # # human readable update text sensor from sensor:uptime # - platform: template # name: Uptime # id: uptime_human # icon: mdi:clock-start # # - platform: template # name: 'Last Restart' # id: device_last_restart # icon: mdi:clock # entity_category: diagnostic - platform: template id: battery_manufacturer name: "Battery Manufacturer" - platform: template id: battery_module_numbers name: "Battery Module Numbers" script: # - id: update_temperature_display # parameters: # x: std::vector& # globalvar: double& # rect: lv_obj_t* # indicator: lv_obj_t* # label: lv_obj_t* # then: # - lambda: |- # char buffer [4]; # buffer[0] = '\0'; # double value = x[3] + ((double)((x[2] << 16) + (x[1] << 8) + x[0]))/16777216; # globalvar = value; # snprintf (buffer, 4, "%.0f", value); # auto bgcolor = lv_color_hex(0xFF0000); # auto ind_color = lv_color_hex(0xFF0000); # if(value < 40) { # bgcolor = lv_color_hex(0x0000FF); # } # else if(value < 50) { # bgcolor = lv_color_hex(0x00FF00); # } # else if(value < 60) { # bgcolor = lv_color_hex(0xFFFF00); # } # else { # ind_color = lv_color_hex(0xFFFF00); // make different to bgcolor # } # lv_obj_set_style_bg_color(rect, bgcolor, LV_PART_MAIN); # lv_obj_set_style_img_recolor(indicator, ind_color, LV_PART_MAIN); # lv_label_set_text(label, buffer); # - id: time_update # then: # - lvgl.indicator.update: # id: minute_hand # value: !lambda |- # auto now = id(time_source).now(); # return now.minute * 12 + now.second/5; # - lvgl.indicator.update: # id: hour_hand # value: !lambda |- # auto now = id(time_source).now(); # return std::fmod(now.hour, 12) * 60 + now.minute; # - lvgl.indicator.update: # id: second_hand # value: !lambda |- # auto now = id(time_source).now(); # return now.second; # - lvgl.label.update: # id: date_label # text: !lambda |- # static const char * const mon_names[] = {"JAN", "FEB", "MAR", "APR", "MAY", "JUN", "JUL", "AUG", "SEP", "OCT", "NOV", "DEC"}; # static char date_buf[8]; # auto now = id(time_source).now(); # snprintf(date_buf, sizeof(date_buf), "%s %2d", mon_names[now.month-1], now.day_of_month); # return date_buf; # - lvgl.label.update: # id: day_label # text: !lambda |- # static const char * const day_names[] = {"SUN", "MON", "TUE", "WED", "THU", "FRI", "SAT"}; # return day_names[id(time_source).now().day_of_week - 1]; # - lvgl.label.update: # id: lbl_digitalclock # text: !lambda |- # auto time_obj = id(time_source).now(); # return time_obj.strftime("%H:%M"); # - id: ind_heating_update # then: # - lvgl.widget.update: # id: ind_geyser_on # hidden: !lambda return !id(g_geyser_heating_on); # - id: init_calendar # then: # - lambda: |- # auto now = id(time_source).now(); # //ESP_LOGI("yopts before", stroptions.c_str()); # int y = 0; # std::string stroptions = to_string(now.year + y); # while(++y < ${DD_MAX_YEARS}) { # stroptions += "\n" + to_string(now.year + y); # } # //ESP_LOGI("yopts after", stroptions.c_str()); # lv_dropdown_set_options(cal_dd_year->obj, stroptions.c_str()); # lv_dropdown_set_selected(cal_dd_year->obj, 0); // this year is first index # lv_dropdown_set_selected(cal_dd_month->obj, now.month-1); # id(g_year_idx) = 0; # id(update_calendar).execute(); # lv_btnmatrix_set_btn_ctrl_all(bmx_calendar->obj, LV_BTNMATRIX_CTRL_CHECKABLE | LV_BTNMATRIX_CTRL_RECOLOR); # - id: update_calendar_month # parameters: # increment : int # then: # - lambda: |- # char yearstr[8]; # lv_dropdown_get_selected_str(cal_dd_year->obj, yearstr, sizeof(yearstr)); # auto year = atoi(yearstr); # int year_idx = lv_dropdown_get_selected(cal_dd_year->obj); # int month_idx = increment + lv_dropdown_get_selected(cal_dd_month->obj); # int month = 1 + month_idx; # if(month > 12 && year_idx < ${DD_MAX_YEARS} - 1) { # month -= 12; # month_idx -= 12; # year++; # year_idx++; # } # else if(month < 1 && year_idx > 0) { # month += 12; # month_idx += 12; # year--; # year_idx--; # } # ESP_LOGI("cm", "month: %d, year: %d", month, year); # if(month < 13 && month > 0) { # lv_dropdown_set_selected(cal_dd_year->obj, year_idx); # lv_dropdown_set_selected(cal_dd_month->obj, month_idx); # id(g_year_idx) = year_idx; # id(update_calendar).execute(); # } # # - id: update_calendar # then: # lambda: |- # char yearstr[8]; # int monthdays[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; # static std::string strdays[44]; # static const char *pstrdays[49]; // including newline at end of week # static const char *newline = "\n"; # id(persist_calendar).execute(); # lv_dropdown_get_selected_str(cal_dd_year->obj, yearstr, sizeof(yearstr)); # int year = atoi(yearstr); # int month = 1 + lv_dropdown_get_selected(cal_dd_month->obj); # bool isLeapYear = (year % 400 == 0) || ((year % 4 == 0) && (year % 100 != 0)); # monthdays[1] = (isLeapYear) ? 29 : 28; # // calculate day of week of 1st of month using Zeller's rule # // https://beginnersbook.com/2013/04/calculating-day-given-date # // modified month, year # int mM = month - 2; # int m = mM < 1 ? 12 + mM : mM; # int mY = mM < 1 ? year - 1 : year; # int k = 1; // day of month # int D = mY % 100; // last two digits of the year # int C = trunc(mY / 100); // first two digits of the year # int F = k + trunc((13 * m - 1) / 5) + D + trunc(D / 4) + trunc(C / 4) - 2 * C; # int Z = F % 7; # int start_of_month = Z < 0 ? Z + 7 : Z; # // end of Zeller's rule # int previous_month = (month == 1) ? 12 : month - 1; # int month_days = monthdays[month - 1]; # int prev_month_days = monthdays[previous_month - 1]; # int i = 0; # int j = -1; # //ESP_LOGI("vals", "start_of_month: %d, previous_month: %d, month_days: %d, prev_month_days: %d", start_of_month, previous_month, month_days, prev_month_days); # for (int w = 0; w < 6 && i < (month_days + start_of_month); w++) { # for(int wd = 0; wd < 7; wd++) { # int day = i + 1 - start_of_month; # if (i < start_of_month) { # day += prev_month_days; # strdays[i] = "#e0e0e0 " + to_string(day) + "#"; # } # else if (i >= (month_days + start_of_month)) { # day -= month_days; # strdays[i] = "#e0e0e0 " + to_string(day) + "#"; # } # else { # strdays[i] = to_string(day); # } # pstrdays[++j] = strdays[i].c_str(); # //ESP_LOGI("bmx", "%s, i: %d, j: %d", pstrdays[j], i, j); # i++; # } # pstrdays[++j] = newline; # //ESP_LOGI("bmxnl", "%s, i: %d, j: %d", pstrdays[j], i, j); # } # pstrdays[j] = NULL; // terminator, overwrites last newline # //ESP_LOGW("day", "terminating at: %d", j); # lv_btnmatrix_set_btn_ctrl_all(bmx_calendar->obj, LV_BTNMATRIX_CTRL_CHECKABLE | LV_BTNMATRIX_CTRL_RECOLOR); # lv_btnmatrix_set_map(bmx_calendar->obj, pstrdays); # lv_btnmatrix_set_btn_ctrl_all(bmx_calendar->obj, LV_BTNMATRIX_CTRL_CHECKABLE | LV_BTNMATRIX_CTRL_RECOLOR); # # - id: persist_calendar # then: # lambda: |- # id(g_year_idx) = lv_dropdown_get_selected(cal_dd_year->obj); # id(g_month_idx) = lv_dropdown_get_selected(cal_dd_month->obj); # // copy year options to persistent globals # const char* opts = lv_dropdown_get_options(cal_dd_year->obj); # int opt_store_size = sizeof(id(g_options_year)); # strncpy(id(g_options_year), opts, opt_store_size); # id(g_options_year)[opt_store_size] = '\0'; # //ESP_LOGI("year options", id(g_options_year)); # # - id: get_calendar_days_state # parameters: # flag: std::string # then: # lambda: |- # // count buttons # int num_buttons = 0; # auto* buttonmap = lv_btnmatrix_get_map(bmx_calendar->obj); # int i = 0; # for (; buttonmap[i] != NULL && buttonmap[i][0] != '\0' && i < 48; i++) { # bool isNewLine = strcmp(buttonmap[i], "\n") == 0; # if (!isNewLine) { # num_buttons++; # } # } # std::string sch_holidays = ""; # std::string pub_holidays = ""; # std::string vac_days = ""; # int h = 0; # for(int i = 0; i < num_buttons; i++) { # bool isSchoolHoliday = lv_btnmatrix_has_btn_ctrl(bmx_calendar->obj, i, LV_BTNMATRIX_CTRL_CHECKED); # bool isPublicHoliday = false; //lv_btnmatrix_has_btn_ctrl(bmx_calendar->obj, i, LV_BTNMATRIX_CTRL_CUSTOM_1); # bool isVacationDay = false; //lv_btnmatrix_has_btn_ctrl(bmx_calendar->obj, i, LV_BTNMATRIX_CTRL_CUSTOM_2); # if(isSchoolHoliday || isPublicHoliday || isVacationDay) { # sch_holidays = sch_holidays + lv_btnmatrix_get_btn_text(bmx_calendar->obj, i) + " "; # h++; # } # } # if(h > 0) { # ESP_LOGI("day", "[%s] s: %s \tp: %s \tv: %s", flag.c_str(), sch_holidays.c_str(), pub_holidays.c_str(), vac_days.c_str()); # } - id: dump_can_message parameters: x: std::vector& can_id: uint32_t remote_transmission_request: bool then: lambda: |- char buffer[80]; char tag[16]; // comment out following few lines if you don't want to deduplicate consecutive messages auto& y = id(can_lastframe); bool isduplicate = can_id == id(can_lastid); auto j = y.begin(); if(x.size() == y.size()) { for(auto i = x.begin(); i != x.end() && isduplicate; ++i) { isduplicate = isduplicate && (*i == *j++); } } if(isduplicate) { return; } else { y.clear(); y.insert(y.end(), x.begin(), x.end()); id(can_lastid) = can_id; } // end of deduplication snprintf(tag, sizeof(tag), "CAN REC: 0x%X", can_id); snprintf(buffer, sizeof(buffer), " %d ", remote_transmission_request); std::string text = ""; std::string line = buffer; std::string decoded = ""; for(auto i = x.begin(); i != x.end(); ++i) { auto byte = *i; snprintf(buffer, sizeof(buffer), " %02X", byte); line += buffer; if(byte > 31 && byte < 127) { text += (char) byte; } else { text += "."; } } switch (can_id) { case ${CB_BATTERY_SETTING}: { float battery_charge_voltage_limit = 0.1 * ((x[1] << 8) + x[0]); // unit = 0.1V float charge_current_limit = 0.1 * static_cast((x[3] << 8) + x[2]); // unit = 0.1A float discharge_current_limit = 0.1 * static_cast((x[5] << 8) + x[4]); // unit = 0.1A snprintf(buffer, sizeof(buffer), "BATTERY SETTINGS: VMax= %.1fV IMaxChg= %.1fA IMaxDis= %.1fA", battery_charge_voltage_limit, charge_current_limit, discharge_current_limit); decoded += buffer; } break; case ${CB_BATTERY_STATE}: { uint soc = static_cast((x[1] << 8) + x[0]); uint soh = static_cast((x[3] << 8) + x[2]); snprintf(buffer, sizeof(buffer), "BATTERY STATE: SOC= %d%% SOH= %d%%", soc, soh); decoded += buffer; } break; case ${CB_BATTERY_STATUS}: { float system_voltage = 0.01 * static_cast((x[1] << 8) + x[0]); // unit = 0.01V Voltage of single module or average module voltage of system float system_current = 0.1 * static_cast((x[3] << 8) + x[2]); // unit = 0.1A Module or system total current float average_cell_temperature = 0.1 * static_cast((x[5] << 8) + x[4]); // unit = 0.1°C snprintf(buffer, sizeof(buffer), "BATTERY STATUS: VSYS= %.2fV ISYS= %.1fA TSYS= %.1f°C", system_voltage, system_current, average_cell_temperature); decoded += buffer; } break; case ${CB_BATTERY_INFO}: { uint8_t protection1 = x[0]; uint8_t protection2 = x[1]; uint8_t alarm1 = x[2]; uint8_t alarm2 = x[3]; uint8_t module_numbers = x[4]; char ch5 = x[5]; char ch6 = x[6]; bool discharge_over_current = protection1 & 0x80; bool cell_under_temperature = protection1 & 0x10; bool cell_over_temperature = protection1 & 0x08; bool cell_or_module_under_voltage = protection1 & 0x04; bool cell_or_module_over_voltage = protection1 & 0x02; bool system_error = protection2 & 0x8; bool charge_over_current = protection2 & 0x01; bool discharge_high_current = alarm1 & 0x80; bool cell_low_temperature = alarm1 & 0x10; bool cell_high_temperature = alarm1 & 0x08; bool cell_or_module_low_voltage = alarm1 & 0x04; bool cell_or_module_high_voltage = alarm1 & 0x02; bool internal_communication_fail = alarm2 & 0x8; bool charge_high_current = alarm2 & 0x01; snprintf(buffer, sizeof(buffer), "BATTERY PROTECT: %s%s%s%s%s%s%s ALARM= %s%s%s%s%s%s%s MN=%d %c%c", discharge_over_current ? "DOC " : "", cell_under_temperature ? "CUT " : "", cell_over_temperature ? "COT " : "", cell_or_module_under_voltage ? "CMUV " : "", cell_or_module_over_voltage ? "CMOV" : "", system_error ? "SERR " : "", charge_over_current ? "COC ": "", discharge_high_current ? "DHC " : "", cell_low_temperature ? "CLT " : "", cell_high_temperature ? "CHT " : "", cell_or_module_low_voltage ? "CMLV " : "", cell_or_module_high_voltage ? "CMHV" : "", internal_communication_fail ? "ICF " : "", charge_high_current ? "CHC ": "", module_numbers, ch5, ch6); decoded += buffer; } break; case ${CB_BATTERY_REQUEST_FLAG}: { uint8_t request_flag = x[0]; bool charge_enable = request_flag & 0x80; bool discharge_enable = request_flag & 0x40; bool request_force_charge1 = request_flag & 0x20; // use bit 5, the SOC range is: 15~19%. Bit 4 is NULL. Bit 5 is designed for inverter allows battery to shut down, and able to wake battery up to charge it. bool request_force_charge2 = request_flag & 0x10; // Bit 5 the SOC range is 5~10%, Bit 4 the SOC range is 9~13%. Bit 4 is designed for inverter doesn`t want battery to shut down, able to charge battery before shut down to avoid low energy. We suggest inverter to use this bit, In this case, inverter itself should set a threshold of SOC: after force charge, only when battery SOC is higher than this threshold then inverter will allow discharge, to avoid force charge and discharge status change frequently. bool request_full_charge = request_flag & 0x08; // Reason: when battery is not full charged for long time, the accumulative error of SOC calculation will be too high and may not able to be charged or discharged as expected capacity. Logic: if SOC never higher than 97% in 30 days, will set this flag to 1. And when the SOC is 97%, the flag will be 0. How to: we suggest inverter to charge the battery by grid when this flag is 1. snprintf(buffer, sizeof(buffer), "BATTERY REQUEST: %s%s%s%s%s", charge_enable ? "CE " : "", discharge_enable ? "DE " : "", request_force_charge1 ? "RFORCECH1 " : "", request_force_charge2 ? "RFORCECH2 " : "", request_full_charge ? "RFULLCH" : ""); decoded += buffer; } break; case ${CB_BATTERY_MANUFACTURER}: { std::string manufacturer(x.begin(), x.end()); decoded += "BATTERY OEM: " + manufacturer; } break; } ESP_LOGI(tag, "%s %s %s", line.c_str(), text.c_str(), decoded.c_str());