configs/sthome-ut1.yaml

packages:
  - !include common/wifi.yaml 
#  - !include common/canbus.yaml
#  - !include common/felicityinverter.yaml  

substitutions:
  name: sthome-ut1
  friendly_name: "sthome-ut1"

esphome:
  name: "${name}"
  friendly_name: "${friendly_name}"

esp32:
  board: nodemcu-32s
  variant:  esp32  
  framework:
    type: arduino #esp-idf #

debug:
  update_interval: 10s

# Enable logging
logger:
  level: DEBUG
  logs:  
    sensor: INFO
    text_sensor: INFO
  
# Enable Home Assistant API
api:
  encryption:
    key: "0Ki4j7JX8Y1IkMGh1fBBu2Dg6DgrnUq8GEXKZvkzeSY="

ota:
  - platform: esphome
    password: "37f546590fcc15e1323d273540eb623a"

wifi:
  domain: ".sthome.org"
  networks:
  - ssid: !secret wifi_ssid1
    password: !secret wifi_password1
  manual_ip:
    static_ip: 10.0.2.1
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${name} Fallback Hotspot"
    password: "7SglIlgdkpAD"

captive_portal:


#preferences:
#  flash_write_interval: 30s

sun:
  id: sun_sensor
  latitude: !secret latitude
  longitude: !secret longitude

time:
  - platform: homeassistant

text_sensor:
  - platform: debug
    device:
      name: "Device Info"
    reset_reason:
      name: "Reset Reason"

  # human readable update text sensor from sensor:uptime
  - platform: template
    name: Uptime
    id: uptime_human
    icon: mdi:clock-start
    update_interval: 10s

#define OUTPUT_R1 16
#define OUTPUT_R2 17
#define OUTPUT_R3 18
#define OUTPUT_R4 19
switch:
  - platform: restart
    name: "${name} Restart"
    id: "restart_switch"

  - platform: gpio
    pin: 
      number: GPIO16
      inverted: true
    id: relay1
    name: "Floodlights Backyard"
    icon: "mdi:light-flood-down"
    restore_mode: RESTORE_DEFAULT_OFF
    # the backyard floodlight auto turns off in 4min 14 sec. So we need to switch relay off just before or at this time
    # TODO: remove or extend auto turn off to >= 10min
    on_turn_on:
      - delay: 250s
      - switch.turn_off: relay1

  - platform: gpio
    pin: 
      number: GPIO17
      inverted: true
    id: relay2
    name: "Relay 2"
    icon: "mdi:run-fast"
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      - delay: 1000ms
      - switch.turn_off: relay2

  - platform: gpio
    pin: 
      number: GPIO18
      inverted: true
    id: relay3
    name: "Relay 3"
    icon: "mdi:run-fast"
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      - delay: 1000ms
      - switch.turn_off: relay3
  
  - platform: gpio
    pin: 
      number: GPIO19
      inverted: true
    id: relay4
    name: "Alarm Zone 4"
    icon: "mdi:alarm-light-outline"
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      - if:
          condition:
            - lambda: |-
                double sun_elevation = id(sun_sensor).elevation();
                return (sun_elevation <= -6); // -6° = civil twilight, -12° = nautical twilight, -18° = astronomical twilight                
            #- sun.is_below_horizon:
          then:
            - switch.turn_on: relay1
      - if:
          condition:
            - binary_sensor.is_on: floodlight_test
          then:
            - switch.turn_on: relay1
      - delay: 30s
      - switch.turn_off: relay4


# define DIGITAL_D1 04
binary_sensor:
  - platform: gpio
  #  device_class: light
    id: floodlight_test
    pin:
      number: GPIO04
      mode:
        input: true
        pullup: true
    filters:
      - delayed_off: 100ms
    name: "Floodlights Test Mode"
    icon: "mdi:lightbulb-on-outline"

#define ANALOG_A1 33
#define ANALOG_A2 32
#define ANALOG_A3 35
#define ANALOG_A4 34
#define ANALOG_A5 39
#define ANALOG_A6 36
sensor:
  - platform: adc
    pin: 35
    name: "Alarm Signal"
    id: alarm_signal
    update_interval: 2000ms
    attenuation: 12db
    sampling_mode: avg
    filters:
      - lambda:
          if (x >= 3.11) {
            return x * 1.60256;
          } else if (x <= 0.25) {
            return 0;
          } else {
            return x * 1.51;
          }
    on_value:
      then:
        # switch on floodlights
        lambda: |-
          if (id(alarm_signal).state > 1.5) {
              id(relay1).turn_on(); 
          }
                    
  # human readable uptime sensor output to the text sensor above
  - platform: uptime
    name: Uptime in Days
    id: uptime_sensor_days
    update_interval: 10s
    on_raw_value:
      then:
        - text_sensor.template.publish:
            id: uptime_human
            state: !lambda |-
              int seconds = round(id(uptime_sensor_days).raw_state);
              int days = seconds / (24 * 3600);
              seconds = seconds % (24 * 3600);
              int hours = seconds / 3600;
              seconds = seconds % 3600;
              int minutes = seconds /  60;
              seconds = seconds % 60;
              auto days_str =  std::to_string(days);
              auto hours_str =  std::to_string(hours);
              auto minutes_str =  std::to_string(minutes);
              auto seconds_str =  std::to_string(seconds);
              return (
                (days ? days_str + "d " : "") +
                (hours ? hours_str + "h " : "") +
                (minutes ? minutes_str + "m " : "") +
                (seconds_str + "s")
              ).c_str();